PHILIPS LAMP DRIVER FLUORESCENT EB-Ci 1-2 14-28W 220-240v 50 60Hz 913713043280

PHILIPS LAMP DRIVER FLUORESCENT EB-Ci 1-2 14-28W 220-240v 50 60Hz 913713043280

Category: LAMP DRIVER

Specifications
Details

PHILIPS LAMP DRIVER FLUORESCENT EB-Ci 1-2 14-28W 913713043280

 

  • 913713043280 - EB-Ci 1-2 14-28W 220-240v 50/60 Hz

 

B-Certalume for TL5 lamps

Affordable, reliable, high-frequency electronic ballast for TL5 fluorescent lamps, ideal alternative to electromagnetic fluorescent systems ;The cost-saving and reliable EB-C has energy efficiency class A2, and its robust design meets all necessary international standards for safety and EMC. ;The ballast is primarily designed for Indoor application. For outdoor application, the luminaire should be minimum Classâ… and need to be sufficiently protected against water & dust. The installation should also be guard against any lightening surge or any other necessary electrical protection as deemed in such typical installation & application.
 
.
 
 

Product Data

General Information

  • Lamp Type : TL5

  • Number of Lamps : 1-3 piece/unit

  • Suitable For Outdoor : Use No

  • Number of Products on MCB (16A Type B) (Max) : 30

  • Automatic Restart : Yes

 

Operating and electrical

  • In-Input Voltage : 220-240 V

  • Input Frequency : 50 or 60 Hz

  • Operating Frequency (Nom) : 42-60 kHz

  • Ignition Method : Warm Start

  • Crestfactor (Max) : 1.7

  • Ignition Time (Nom) : 2.0 s

  • Mains Voltage Performance (AC) : -10%-+10%

  • Mains Voltage Safety (AC) : 198...264V

  • Earth Leakage Current (Max) : 0.5 mA

  • Inrush Current Width : 0.224 ms

  • Ballast Factor (Nom) : 1

  • Power Factor (Max) : 0.98

  • Power Factor (Min) : 0.90

  • Input Power (Max) : 60.1 W

  • Input Power (Min) : 16.6 W

  • Power Losses (Max) : 4.8 W

  • Power Losses (Nom) : 2.1 W

  • Inrush Current Peak (Max) : 17 A

  • Rated Lamp Power : 14-28 W

 

Wiring

  • Connector Type Input Terminals : Insert

  • Cable Capacity Output Wires Mutual (Max) : 150 pF

  • Connector Type Output Terminals : Insert

  • Cable Length Hot Wiring : 0.75 m

  • Wire Striplength : 7.5-8.5 mm

  • Input Terminal Cross Section : 0.50-1.50 mm²

  • Output Terminal Cross Section : 0.50-1.50 mm²

  • Cable Capacity Output Wires to Earth (Max) : 150 pF

  • Connector Type : Insert

 

System Characteristics

  • Rated Lamp Power on TL5 : 14-28 W

  • System Power on TL5 : 16.6-60.1 W

  • Lamp Power on TL5 : 14.5-27.8 W

  • Power Loss on TL5 : 2.1-4.8 W

 

Temperature

  • T-Ambient (Max) : 50 °C

  • T-Case Lifetime (Max) : 75 °C

  • T-Case Lifetime (Max)-DUP(do not use) : 75 °C

  • T-Case Maximum (Max) : 75 °C

  • T-Ignition (Max) : 50 °C

  • T-Ignition (Min)  :-10 °C

 

Mechanical and housing 

  • H-Housing Material : Plastic

  • Housing : L210x30x26mm


Emergency operation

  • Battery voltage lamp ignition : 165-253V


Approval and application

  • Energy Efficiency Index : A2

  • IP Classification : IP 20 [Ingress Protection 20]

  • EMI 9 kHz ... 30 MHz : EN55015

  • EMI 30 MHz ... 1000 MHz : EN 55015

  • Safety Standard : IEC 61347-2-3,IEC 61347-1

  • Quality Standard : ISO 9001

  • Environmental Standard : ISO 14001

  • EMC Immunity Standard : EN 55015

  • Vibration Standard : IEC 60068-2-29 FB

  • Bumps Standard : Not specified

  • Approval Marks : CB Certificate CCC certicate TISI marking PSB certication RCM compliance SNI Certicate CS Compliance IRAM Compliance

  • Temperature Marking : Yes

  • Hum And Noise Level : < 30 dB(A)

 

Product Data

  • Full product code : 694793913355000

  • Order product name : EB-Ci 1-2 14-28W 220-240V 50/60 Hz

  • EAN/UPC - Product : 6947939133550

  • Order code : 913713043280

  • Numerator - Quantity Per Pack : 1

  • Numerator - Packs per outer box : 30

  • Material Nr. (12NC) : 913713043280

  • Net Weight (Piece) : 0.080 kg 




View more about PHILIPS LAMP DRIVER FLUORESCENT EB-Ci 1-2 14-28W 220-240v 50 60Hz 913713043280 on main site