Details

---

T&J DECO SERIES 230V 600W 2 Way Switch Dimmer Module (EMC) (White / Matt Black / Charcoal Black / Matt Silver Black / Matt Silver) W2728 / W2728-SBL / W2728-ST / W2728-MSB / W2728-MSL

• W2728

• W2728-SBL

• W2728-ST

• W2728-MSB

• W2728-MSL

Technical Specification

• Rated Voltage : 220-240V, 50/60Hz
• Rated Wattage : 40-600W (Resistive)
• Rated Current : 5A (Switch, Resistive)
• Two-way switching option
• Push-on/off switch
• Two Deco module size
• Recommended wire size : 0.5mm² - 1.5mm²
• Dimming method : Leading-edge (TRIAC)
• Internal fuse & thermal fuse protection
• Dimensions : 40 x 46 x 50 mm (HxWxD) 
• Mounting box : >45 mm
• R1150, flush mounting, plastic (80 x 80 x 48.4 mm) (WxHxD)
• M1247, flush mounting, metal (79 x 73 x 47 mm) (WxHxD)
• Comply to Standards : IEC 60669 / AS/NZS 3133 / GB 16915, EMC

Typical connection method
1-way switching

2-way switching


Minimum brightness adjustment

• If the dimmable lamp flickers at the minimum range, the internal trimmer (factory pre-set) can be adjusted (clockwise) to increase the minimum brightness, to minimize the flickering.
• Note : This adjustment must be done carefully by a competent electrician as it involves removal of the rear housing, exposing dangerous high voltage.