Details

---

MEANWELL 70~100W CONSTANT CURRENT MODE LED DRIVER - ELG-100-C series - ELG-100-C1050

• ELG-100-C1050

Features

• Constant current mode output
• Metal housing design with fucntional ground
• Built-in active PFC function
• No load / Standby power consumption <0.5W
• IP67/IP65 rating for indoor or outdoor installations
• Function options: output adjustable via potentiometer; 3 in 1 dimming (dim-to-off); Smart timer dimming; DALI
• Typical lifetime>50000 hours
• 5 years warranty

Application

• LED street lighting
• LED harbor lighting
• LED bay lighting
• LED greenhouse lighting
• LED flood lighting
• Type ''HL'' for use in Class !, Division 2 hazardous (Classified) location.

Description
ELG-100-C series is a 100W LED AC/DC driver featuring the constant current mode and high voltage output. ELG-100-C operates from 100~360VAC and offers models with different rated current ranging between 360mA and 1400mA. Thanks to the high efficiency up to 92%, with the fanless design, the entire series is able to operate for -40°C~+90°C case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. ELG-100-C is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. 

SPECIFICATION

• Model : ELG-100C1050

Output 

• Rated current : 1050mA
• Rated power : 200VAC~305VAC / 99.75W / 100VAC~180VAC / 70.35W
• Constant current region : 48 ~ 95V
• Open circuit voltage : 105V
• Current adj. range : Adjustable for A/AB- Type only (via built-in potentiometer) / 525 ~ 1050mA
• Current ripple : 5.0% max. @ rated current
• Current tolerance : ± 5.0%
• Set up time : 1000ms/115AC / 500ms/230VAC

Input

• Voltage range : 100 ~ 305VAC / 142 ~ 431VDC continue, 350VAC for 24Hrs; 360VAC for 1Hr 
• Frequency range : 47 ~ 63Hz
• Power factor : PF ≧ 0.97/115VAC, PF ≧ 0.92/277VAC @ full load 
• Total harmonic distortion : THD < 20% (@load ≧ 50%/115VC; @load ≧60%/230VAC; @load ≧ 78%/277VAC)
• Efficiency : 90%
• AC current : 1.1A/115VAC / 0.6A/230VAC / 0.5A/277VAC
• Inrush current : Cold start 40A (width=760 μs measured at 50% peak)/230VAC; Per NEMA410
• Max No. of PSUs on 16A circuit breaker : 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
• Leakage current : <0.75mA / 277VAC
• No load / standbby power consumption : No load power consumption <0.5Q for blank / A / Dx / D2-type / Standby power consumption <0.5W for B / AB / DA-type

Protection

• Short circuit : Hiccup mode, recovers automatically after fault condition is removed
• Over voltage : 110 ~ 130V / Shut down o/p voltage, re-power on to recover
• Over temperature : Shut down o/p voltage, re-power on to recover

Environment

• Working temp. : Tcase=-40 ~ +90°C
• Max. case temp. : Tcase=+90°C
• Working humidity : 20 ~ 95% RH non-condensing
• Storage temp. humidity : -40 ~ +80°C, 10 ~ 95% RH
• Temp. coefficient : ± 0.03%/​ °C (0~60°C)
• Vibration : 10 ~ 500Hz, 5G 12min,/1 cycle, period for 72min. each along X, Y, Z axes

Safety & EMC

• UL8750 (type ''HL''), CSA C22.2 No. 250.13-12;BS EN/EN/AS/NZS 61347-1, BS EN/EN/AS/NZS 61347-2-13 independent, BS EN/EN62384; EAC TP TC 004;BIS IS15885 (for 700A, 1050A only); GB19510.1, GB 19510.14; IP65 or IP67; KC61347-1, KC61347-2-13 approved
• DALI standards : Compliance to IEC62386-101,102, (207 by request) for DA type only
• Withstand voltage : I/P-O/P:3.75KVAC   I/P-FG:2.0KVAC    O/P-FG1.5KVAC
• Isolation resistance : I/P-O/P,I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH
• EMC emission : Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load ≧ 60%) ; BS EN/EN61000-3-3; gB17743, GB17625.1 ; EAC TP TC 020; KC KN15, KN61547

Others

• MTBF : 1087.5K hrs min. Telcordia SR-332 (Bellcore)    300.6Khrs min.     MIL-HDBK-217F (25°C)
• Dimension : 199*63*35.5 mm (L*W*H)
• Packing : 0.85kg; 16pcs/14.2kg/0.72CUFT